What is OBD2 code P0122? What does it mean?
The OBD2 code P0122 indicates that there is a low voltage issue at the throttle position sensor, which is integral for determining the position of the throttle in an internal combustion engine. PCM logs a P0122 code when the throttle position sensor “A” displays lower voltage than normal. This fault can lead to erratic engine behavior, such as rough idling or sudden changes in engine speed.
What are the most common causes for a P0122 code?
- A loosely-mounted throttle position sensor
- Electrical short on the sensor circuit, either to the ground or to another wire
- Faulty throttle position switch
- Faulty sensor
- Bad or corroded wiring or connections for the sensor
- Issues with the PCM
- Other problems
How to fix P0122 code?
To fix a P0122 code, start by checking the throttle position sensor (TPS) and ensure it’s securely mounted. Inspect the wiring and connections for any signs of damage or corrosion, as these can interfere with the sensor’s signal. You may also want to test the sensor itself or replace it if it’s faulty. Lastly, consider inspecting the PCM for any potential issues. Keep in mind, other underlying issues or additional problems could be causing this code, so it’s best to leave the diagnosis and repair to a professional mechanic.
It’s best to visit a dealership, an auto repair shop, or a certified mechanic for proper diagnosis and repairs.
Interpreting the OBD2 Codes like P0122
An OBD2 scanner provides monitoring for various systems in vehicles. They include the engine control module, body, chassis, etc. When you use a scan tool to read the code, you can immediately tell which system has a fault based on how it appears. Here’s a breakdown for professionals and automotive enthusiasts.
The First Character (Letter)
All OBDII codes start with a letter that denotes the part of the vehicle that has a fault:
- P – Powertrain: This includes the engine, transmission and all the associated accessories.
- U – Network & Vehicle Integration: These functions are managed and shared by onboard computer systems.
- B – Body: These parts are mainly found in the passenger compartment area.
- C – Chassis: This covers mechanical systems and functions like steering, suspension, and braking.
The Second Character (Number)
The first letter is followed by a number. This number can only be ‘0’ or ‘1’:
- 0 – If it’s a ‘0,’ the code is a standardized (SAE) code, also known as a generic code.
- 1 – If it’s a ‘1,’ then you’re looking at a manufacturer-specific code.
The Third Character (Number)
This number denotes the particular vehicle system that has a fault. There are eight systems in total:
- 0 – Fuel and air metering and auxiliary emission controls
- 1 – Fuel and air metering
- 2 – Fuel and air metering (injector circuit)
- 3 – Ignition systems or misfires
- 4 – Auxiliary emission controls
- 5 – Vehicle speed control and idle control systems
- 6 – Computer and output circuit
- 7 – Transmission
The Fourth And Fifth Characters (Number)
The final part of a DTC (Diagnostic Trouble Code) is a two-digit number. This number defines the exact problem that you’re dealing with. It can be any number between 0 and 99. By reading this, you can use a manual or a professional diagnostic reader to check, clear, or erase the code from your vehicle’s system.
As you can see, a typical DTC has five characters in total, and each one of those characters gives it a description. The correct interpretation of these codes is vital for accurate car diagnostics.
Example:
Code: P0301 Description: Cylinder 1 Misfire Detected
Explanation:
- P: Powertrain (the category of codes that include the engine, transmission, and associated accessories)
- 0: Standardized (SAE) codes. Codes starting with a “0” are standardized across all vehicle manufacturers. Codes starting with “1” are manufacturer-specific.
- 3: Refers to the area of the issue (in this case, “Ignition System or Misfire”)
- 01: Specific fault index. “01” refers to “Cylinder 1 Misfire Detected”.
Whether you’re a pro using a Bluetooth-enabled data diagnostic tool or a DIY with a basic scanner, understanding the meaning of these codes helps in effectively managing vehicle repairs and maintenance.
Disclaimer: Information is provided with diligence but without liability for inaccuracies or omissions. We are not liable for any direct or indirect damages resulting from the use of this information. Use at your own risk.
Cars: Abarth, Alfa Romeo, Audi, Bentley, BMW, Cadillac, Chevrolet, Chrysler, Citroen, Dacia, Daewoo, Daihatsu, Dodge, Ferrari, Fiat, Ford, Foton, GWM, Honda, Hyundai, Isuzu, Iveco, Jaguar, Jeep, Jinbei, JMC, KIA, Lamborghini, Lancia, Land Rover, Lexus, Lotus, Renault, Maserati, Mazda, Mercedes Benz, MG, Mini, Mitsubishi, Multicar, Nissan, Opel/Vauxhall, Peugeot, Porsche, Renault, Rolls-Royce, Rover, Saab, Samsung, Seat, Shuanghuan, Skoda, Smart, SsangYong, Subaru, Suzuki, Tata, Toyota, Volkswagen, Volvo, Yuchai and other.