What is OBD2 code P0137? What does it mean?
The OBD2 code P0137 indicates that the oxygen sensor circuit for Bank 1 Sensor 2 is experiencing low voltage. This may result from a faulty sensor, wiring issues, or exhaust leaks, affecting engine performance and emissions control.
What are the most common causes for a P0137 code?
- Malfunctioning O2 sensor (including a bad heater)
- Lean running condition (this will also be reflected by positive fuel trim readings)
- An exhaust leak that allows oxygen to enter the exhaust stream
- A problem with the O2 sensor circuit
- Outdated PCM software (rare)
How to fix P0137 code?
To fix a P0137 code, start by checking and possibly replacing the downstream O2 sensor on Bank 1. Next, inspect for any exhaust leaks that might allow oxygen to enter the system, as this could interfere with the sensor readings. It’s also helpful to examine the wiring and connections in the O2 sensor circuit to ensure they’re intact and functioning properly. Updating the PCM software may be necessary, though this is rarely the main issue. Keep in mind, other underlying issues or additional problems could be causing this code, so it’s best to leave the diagnosis and repair to a professional mechanic.
It’s best to visit a dealership, an auto repair shop, or a certified mechanic for proper diagnosis and repairs.
Interpreting the OBD2 Codes like P0137
An OBD2 scanner provides monitoring for various systems in vehicles. They include the engine control module, body, chassis, etc. When you use a scan tool to read the code, you can immediately tell which system has a fault based on how it appears. Here’s a breakdown for professionals and automotive enthusiasts.
The First Character (Letter)
All OBDII codes start with a letter that denotes the part of the vehicle that has a fault:
- P – Powertrain: This includes the engine, transmission and all the associated accessories.
- U – Network & Vehicle Integration: These functions are managed and shared by onboard computer systems.
- B – Body: These parts are mainly found in the passenger compartment area.
- C – Chassis: This covers mechanical systems and functions like steering, suspension, and braking.
The Second Character (Number)
The first letter is followed by a number. This number can only be ‘0’ or ‘1’:
- 0 – If it’s a ‘0,’ the code is a standardized (SAE) code, also known as a generic code.
- 1 – If it’s a ‘1,’ then you’re looking at a manufacturer-specific code.
The Third Character (Number)
This number denotes the particular vehicle system that has a fault. There are eight systems in total:
- 0 – Fuel and air metering and auxiliary emission controls
- 1 – Fuel and air metering
- 2 – Fuel and air metering (injector circuit)
- 3 – Ignition systems or misfires
- 4 – Auxiliary emission controls
- 5 – Vehicle speed control and idle control systems
- 6 – Computer and output circuit
- 7 – Transmission
The Fourth And Fifth Characters (Number)
The final part of a DTC (Diagnostic Trouble Code) is a two-digit number. This number defines the exact problem that you’re dealing with. It can be any number between 0 and 99. By reading this, you can use a manual or a professional diagnostic reader to check, clear, or erase the code from your vehicle’s system.
As you can see, a typical DTC has five characters in total, and each one of those characters gives it a description. The correct interpretation of these codes is vital for accurate car diagnostics.
Example:
Code: P0301 Description: Cylinder 1 Misfire Detected
Explanation:
- P: Powertrain (the category of codes that include the engine, transmission, and associated accessories)
- 0: Standardized (SAE) codes. Codes starting with a “0” are standardized across all vehicle manufacturers. Codes starting with “1” are manufacturer-specific.
- 3: Refers to the area of the issue (in this case, “Ignition System or Misfire”)
- 01: Specific fault index. “01” refers to “Cylinder 1 Misfire Detected”.
Whether you’re a pro using a Bluetooth-enabled data diagnostic tool or a DIY with a basic scanner, understanding the meaning of these codes helps in effectively managing vehicle repairs and maintenance.
Disclaimer: Information is provided with diligence but without liability for inaccuracies or omissions. We are not liable for any direct or indirect damages resulting from the use of this information. Use at your own risk.
Cars: Abarth, Alfa Romeo, Audi, Bentley, BMW, Cadillac, Chevrolet, Chrysler, Citroen, Dacia, Daewoo, Daihatsu, Dodge, Ferrari, Fiat, Ford, Foton, GWM, Honda, Hyundai, Isuzu, Iveco, Jaguar, Jeep, Jinbei, JMC, KIA, Lamborghini, Lancia, Land Rover, Lexus, Lotus, Renault, Maserati, Mazda, Mercedes Benz, MG, Mini, Mitsubishi, Multicar, Nissan, Opel/Vauxhall, Peugeot, Porsche, Renault, Rolls-Royce, Rover, Saab, Samsung, Seat, Shuanghuan, Skoda, Smart, SsangYong, Subaru, Suzuki, Tata, Toyota, Volkswagen, Volvo, Yuchai and other.